Solid tensile agent product manual

1、 Introduction to Solid Tensile Agent Products:

The newly developed new tensile agent by Guangzhou Mingri Chemical Co., Ltd. can simultaneously possess five special chemical effects for papermaking:

1. Has the function of a tensile agent: 2. Has the function of a retention aid; 3. Has a hardening agent effect; 4. Has the function of moisture-proof (anti mold) agent; 4. Has a brightening and brightening effect.

Specifically:

1. It can effectively increase the orderly arrangement of long and short fibers between pulp fibers, and increase paper tensile strength by more than 30% without reducing various indicators of the original paper;

2. Promote an increase in paper hardness, stiffness, and thickness. It can increase the folding resistance of paper by 100-200%, significantly improving the hardness and stiffness of the paper. It can significantly improve the elongation and fracture resistance of paper fibers, with an extension of more than 50%. The paper's resistance to breakage and cracking is significantly enhanced, and the surface brightness of the paper increases;

3. This product has a strong moisture releasing and moisture-proof effect on paper, and the paper will not become damp, soft, or moldy even in rainy, damp, or moldy seasons.

3. This product has a retention aid function, which can increase the retention rate of fine fibers in 70% of pulp after dilution and addition, improve paper production, reduce pulp loss caused by pulp loss, and enhance factory efficiency; At the same time, the color of the wastewater flowing out becomes clearer, reducing the difficulty and cost of wastewater discharge treatment;

4. Specially suitable for manufacturers of toilet paper, cultural paper, packaging paper, cardboard, kraft paper, superstitious paper, etc. who require special tensile strength, stiffness, and brightness of the paper!

2、 Physical and chemical indicators of tensile agent products:

Appearance: White solid small particles; Effective content: greater than 99%; Chemical composition: Amphoteric polymer copolymer resin.

3、 Performance of tensile agent products:

1. Using this product can improve multiple physical indicators of various types of paper, increase paper dry strength by more than 20%, paper tensile strength by more than 1/3, increase filler retention rate by 75.5%, and save 50-80KG of pulp per ton, with significant economic benefits.

2. The use of this product can reduce the amount of talcum powder, decrease the concentration of white water under the net by about 50%, and increase the retention rate of fine fibers by 70% -80%. The tensile strength and whiteness of recycled paper have been improved. Especially improving the water filtration performance of the mixing section and the tension and strength of the cadres, increasing the speed of the vehicle, and increasing production by more than 30%.

3. It can increase the filler retention rate of bleached sulfite pulp from about 53% to 75%, reduce fiber loss by about 70%, increase sizing degree, reduce rosin content, reduce double-sided difference, and improve printability.

4. This product has improved the tensile strength and longitudinal and transverse tear resistance of packaging paper, paper bag paper, and double adhesive paper.

5. Adding this product can improve the uniformity and printability of the paper, reduce the whiteness, smoothness, and stretch deformation of the paper after forming, and avoid warping and folding.

6. Adding this product can improve the beating degree, reduce power consumption, and extend the service life of the woolen fabric by 5-7 days. The comprehensive cost per ton can be reduced by 100-200 yuan, and the economic benefits are very significant.

4、 【 Usage and dosage of tensile agent 】:

Cultural paper 0.3-0.8 kg/ton, toilet paper 0.5-0.8 kg/ton, superstitious paper 0.6-0.8 kg/ton, embossed paper 0.5-0.8 kg/ton, copperplate paper 0.4-0.6 kg/ton, double-sided adhesive tape 0.4-0.8 kg/ton

Usage: Use 1kg of paper per ton. Dilute with cold water at a ratio of 1:150 before use. Dilute for 60-90 minutes. After dilution, add directly to the mixing tank and stir for 20-30 minutes before use.

5、 【 Tensile agent packaging and storage 】:

25KG/bag, can also be packaged according to user requirements. It is strictly prohibited to expose to direct sunlight or rain.